lbhbul Posted February 12, 2015 Report Share Posted February 12, 2015 It will get better soon, luck will visit down the road. Have a good day Larry Quote Link to comment Share on other sites More sharing options...
iconic558 Posted February 21, 2015 Author Report Share Posted February 21, 2015 this is odd... ignition coil OK capacitor OK 30 volts AC output from source coil when kicking her over when checked from source coil wire to ground, but this voltage disappears when 'loaded'...as in when the source coil feed is connected to the ignition coil? I had a similar problem on a non running Nissan Primera last year, turned out to be a corroded wire, similar symptoms, I had volts (DC) 'unloaded' but the wire wasn't carrying a decent enough current and when 'loaded' the volts dropped right off...could be a similar issue I guess... ....puller is here so may have to pull the flywheel afterall Quote Link to comment Share on other sites More sharing options...
iconic558 Posted March 4, 2015 Author Report Share Posted March 4, 2015 Fixed.....source coil had broken down under load, rewound by West Country Windings in Essex £48 with post, sent Wednesday, back Tuesday, great service. 2 Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.