Jump to content

Sign in to follow this  
hughesy

Montesa 330 Rebuild Info

Recommended Posts

Hi, looking for some advice, I'm currently rebuilding a 330 Montesa and can't find enough detail in the manual to solve the following:

• what is the arrangement with the lower rear shock mount? I've replaced the spherical bearing. Is there a bush that fits inside this or a shouldered bolt?

• does anyone have simplified wiring diagram? Does the pink wire from the stator go to a kill switch then to earth?

• is it worth moving condenser up to underneath tank? What's the best way to do this?

Any help appreciated.

Steve

Share this post


Link to post
Share on other sites
 

Hi steve, I have come across this myself. I believe there is a small top hat that goes either side of the bearing that sits inside the rear shock bottom mount. With regards the loom i did away with the loom and run just the red to the coil as I have no lighting kit. I believe the pink is for the rear brake pedal switch.

Share this post


Link to post
Share on other sites
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...