Jump to content

Sign in to follow this  
rileys

Help needed kill switch

Recommended Posts

Just bought a electronic ignition for one of my bikes and a kill switch from in motion 

2 wires on the kill switch black with white stripe. And black with yellow stripe. Should it be black yellow earthed to frame ?

Greg

Share this post


Link to post
Share on other sites
 

It makes no difference which wire goes to ground. Connect one wire to the coil lead and the other to ground. All the kill switch does is complete the circuit to ground when depressed. 

  • Like 1

Share this post


Link to post
Share on other sites
 
13 hours ago, nh014 said:

It makes no difference which wire goes to ground. Connect one wire to the coil lead and the other to ground. All the kill switch does is complete the circuit to ground when depressed. 

Thank you. For the reply much appreciated put the new in motion 

electronic ignition in this morning 

got spark and fuel but no start. 
🙁 just thinking I don’t need A condenser with the new set Do I 

will try again tomorrow. Got to ride my bike this summer 

Share this post


Link to post
Share on other sites
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...