gasgasssser Posted April 3, 2006 Report Share Posted April 3, 2006 does anyone know how many teeth the std sprockets should have on a 290 sherco?? Cheers. Quote Link to comment Share on other sites More sharing options...
andy_290 Posted April 3, 2006 Report Share Posted April 3, 2006 42 I think Steve Quote Link to comment Share on other sites More sharing options...
hasbeen Posted April 3, 2006 Report Share Posted April 3, 2006 STD GEARING 10/42 BUT 11 TOOTH FRONT IS MUCH BETTER CHECK THIS http://www.sherco-moto.com/service_manuals.html Quote Link to comment Share on other sites More sharing options...
dale Posted April 3, 2006 Report Share Posted April 3, 2006 Hi,just reading previous post,why do you say 11 tooth on front is better?Any answers as i run a 290.Thanks Quote Link to comment Share on other sites More sharing options...
hasbeen Posted April 3, 2006 Report Share Posted April 3, 2006 lets you pull a higher gear in mud,only my opinion Quote Link to comment Share on other sites More sharing options...
gasgasssser Posted April 3, 2006 Author Report Share Posted April 3, 2006 I ask because i did my first trial on this bike on sunday,i rekon the gears are to low,it seems to rev out to quick.I started using 3rd where a would normally use second on some steep bankings and i was getting much better grip with the lesser revs.I would never have neede to do this on my previous bike (gasgas)Strange these shercos.another thing that bugs me is the difference between 3rd/4th,youm really notice it going between sections,its like theres a gear missing!!The 11 tooth sounds a good idea.Thanks a lot Steve Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.