Sherco Running Backwards?
Started by bagger, Sep 14 2006 02:31 PM
5 replies to this topic
#1
Posted 14 September 2006 - 02:31 PM
took the kids sherco out of the shed yesterday and started it up.kicked it in gear and the dang thing ran backwords.i have heard of this problem on the bultacos in the 70s but what gives?you would think they would have fixed this glitch over the last 35 years or so
#2
Posted 14 September 2006 - 02:53 PM
The problem with the old Bultacos running backwards was due to the timing being set wrong.
#3
Posted 14 September 2006 - 04:21 PM
Quote
kicked it in gear and the dang thing ran backwords
That'll be a five then
Yep had the same problem with the Bulto's bit embaressing when you are all ready for setting off in the section....................only to let the clutch out and reverse into the queue of riders
If you can't beat em......get stickier tyres!!
Yorkshire War Cry....HOW MUCH??
Yorkshire War Cry....HOW MUCH??
#4
Posted 14 September 2006 - 06:04 PM
if i remember from acouple of earlier threads it sounds like a key on the crank has sheared and the timing has slipped.. good luck..
#5
Posted 14 September 2006 - 10:14 PM
Hi,try looking this topic in the sherco forum,it was definitely posted and discussed earlier this year.I think the outcome was a new stator if my memory serves
#6
Posted 15 September 2006 - 01:15 PM
It happened to me, as well as slightly bending the kick start. Played around with the stator but that didn't cure the problem. Woodruff key was ok as everything else. So I put a new stator in. That fixed it.
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users















