Hi my 2008 290cc sherco keeps jumping out of gear, is any one elses doing this?? if so is there anything i can do to stop it doing this?? any help is much appriciated thanks Tom
2
4 replies to this topic
#2
-
- Members
-
- 293 posts
Advanced Member
- Location:ontario, canada
- Bike:OSSA
- Club:ata
Posted 18 August 2008 - 04:40 PM
Sherco250cc, on Aug 18 2008, 11:58 AM, said:
Hi my 2008 290cc sherco keeps jumping out of gear, is any one elses doing this?? if so is there anything i can do to stop it doing this?? any help is much appriciated thanks Tom
my 07 caby (new in 08) was very stiff and knotchy jumping out of gear from time to time, my dealer suggested making a concentrated effort to make sure every change is solid, he has not seen tranny issues, once run in it should be fine. he was right, shifts great now that its run in, hope thats all it is...
cheers
#3
-
- Members
-
- 524 posts
Advanced Member
- Location:Richmond North Yorkshire
- Bike:Scorpa
- Club:Richmond Darlington Guisborough Ripon
Posted 18 August 2008 - 05:58 PM
This can happen if the gear shift shaft gets bent at all, also i have seen this when the shift return spring goes. Not a difficult job to fix tw bikesport did mine for little cash.
“There he goes. One of God's own prototypes. Some kind of high powered mutant never even considered for mass production. Too weird to live, and too rare to die.”
"Fu*k it john lets have a Beer."
"Fu*k it john lets have a Beer."
#4
-
- Members
-
- 146 posts
Advanced Member
Posted 18 August 2008 - 08:02 PM
Hi,
A friend of mine has a 08 290 and has had trouble with the fork on the end of the selector shaft.
Aparently the fork is a different material to the shaft,one is harder that the other but i cant remember which one is which,the fault is the weld that holds fork to the shaft is not very good because of the two different materials.
My friend has had his go twice,i think Sherco importers are aware and very helpful i believe??
Benz
A friend of mine has a 08 290 and has had trouble with the fork on the end of the selector shaft.
Aparently the fork is a different material to the shaft,one is harder that the other but i cant remember which one is which,the fault is the weld that holds fork to the shaft is not very good because of the two different materials.
My friend has had his go twice,i think Sherco importers are aware and very helpful i believe??
Benz
#5
-
- Members
-
- 18 posts
New Member
- Bike:Sherco 2007
Posted 18 August 2008 - 08:04 PM
benz19, on Aug 18 2008, 09:02 PM, said:
Hi,
A friend of mine has a 08 290 and has had trouble with the fork on the end of the selector shaft.
Aparently the fork is a different material to the shaft,one is harder that the other but i cant remember which one is which,the fault is the weld that holds fork to the shaft is not very good because of the two different materials.
My friend has had his go twice,i think Sherco importers are aware and very helpful i believe??
Benz
A friend of mine has a 08 290 and has had trouble with the fork on the end of the selector shaft.
Aparently the fork is a different material to the shaft,one is harder that the other but i cant remember which one is which,the fault is the weld that holds fork to the shaft is not very good because of the two different materials.
My friend has had his go twice,i think Sherco importers are aware and very helpful i believe??
Benz
Thanks for that il ring my local dealer!
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
