Jump to content

 

- - - - -

No Spark After Full Open Throttle


2 replies to this topic

#1 geordabroad

    Member

  • Members
  • PipPip
  • 41 posts
  • Location:Beijing, China
  • Bike:GasGas TXT300 Pro
  • Club:Beijing trials and MTB club

Posted 28 October 2008 - 11:43 PM

Hello, my carb stuck open on my '06 TXT Pro 300. It revved flat out for around 10 secs until the petrol ran out (I'd turned it off).

I've started working through ther bike to see why it wouldn't start immediately afterwards and find there is no spark. It used to start first or second kick. It has a Kokusan ignition.

Can anyone tell me what I am likely to have damaged? Should I get a new coil, a new Ignition control module, voltage regulator? or may I have done something to the Ignition stator assembly? How can I check what might be broken?


Keen but confused in Beijing :unsure:

#2 Cynical

    New Member

  • Members
  • Pip
  • 19 posts
  • Location:North Texas - Sometimes
  • Bike:Mont, KTM, Husky, GG
  • Club:Bentleys

Posted 28 October 2008 - 11:56 PM

Sounds like you severed the woodruff key on the flywheel, hope you didn't bend the crank too.

Check it out, if it starts after the woodruff key repair but wont run properly, maybe it's sucking in air from the deformed crank seals behind the flywheel. Oh Brother, new crank !!!

Good luck

#3 HAM2

    Advanced Member

  • Members
  • PipPipPip
  • 2,707 posts
  • Location:N.E. England - Rund Wor Way
  • Bike:Sherco 290-05
  • Club:Jurreh Sinclurs.... Pheonix

Posted 29 October 2008 - 04:04 PM

This happened to me once..I had permanently depressed the kill switch in a panic. :unsure:
Check it 1st before you spend any money on parts.
For the last time...it's not 'SUPPOSED' to have a seat.
There are two types of men in this world:-
1) Those who are Geordies and..
2) Those that want to be.





1 user(s) are reading this topic

0 members, 1 guests, 0 anonymous users