I want to remove the 4rt front spindle and speedo spacer. I have been told that I can replace with a Sherco spindle. Could anyone confirm if this is correct and if so, is there a specific model of spindle that I need to use? Cheers for any help.
Page 1 of 1
Front Spindle 4rt Replace with Sherco Spindle?
#1
Posted 07 June 2010 - 09:09 PM
#2
Posted 08 June 2010 - 06:52 AM
You just call. BVM and they will make sure you get the right spindle
Christian
Christian
#3
Posted 08 June 2010 - 06:55 AM
if you are trying to get the waight down h&d raceing do titanium spindles front and back and the swing arm spindle too for a 4rt.
#4
Posted 08 June 2010 - 01:30 PM
why dont you keep the same spindle but get a spacer that replaces the speedo drive most
shops will stock them for about £15
jsp
shops will stock them for about £15
jsp
#5
Posted 08 June 2010 - 08:08 PM
Cheers for your replies. I will contact BVM and ask them about spindle and/or spacer.
Share this topic:
Page 1 of 1

Help












