drscott
-
Posts
6 -
Joined
-
Last visited
Contact Information
-
FTA is hosting the annual Fun in the Sun trial March 10th and 11th at Hard Rock cycle park in Ocala, Florida. Flyer link: http://www.floridatrials.net/sitebuildercontent/sitebuilderfiles/fnsflyer2012.jpg Head south and join us for a snow free two days of trial riding!
-
Florida Trials Association Fun In The Sun 2010
drscott replied to drscott's topic in USA Trials Reviews & Previews
Hi Alan As far as I know, the AHRMA trial is still planned for Friday Feb 26th at Gatorback in Gainesville. http://www.ahrma.org/Z-2010/Nationals/PVMX...ack_Preview.htm FTA unfortunately doesn't have the manpower to host both events. I do hope it happens, I was planning to ride the AHRMA trial. Scott -
Florida Trials Association is hosting the annual Fun in the Sun 2 day trial Feb. 27th and 28th 2010. Come join us at Hard Rock Cycle Park in Ocala Florida. Novice, intermediate, sportsman, advanced, expert, and champ lines will be set up. Cost: $30/day or $55 for two days for adult riders, $15/day or $25 for two days for minor riders. Hard Rock charges a $10 gate fee. AMA membership is required, bring your card or sign up onsite if necessary. Schedule of events Sign-up:
-
Flyer for the event is posted on our website: http://www.floridatrials.net/ Note: start times have been changed. Scott
-
Jesus, thanks for the reply and the link. How difficult should it be to get the fork tube out of the lower slider? The lower bolt and inner rod are out, but I cannot get them to seperate. Anyone have a suggestion-on my GasGas, they seperated pretty easily. I was about to put the tube back into the triple trees and try to tap the lower slider off with a hammer but thought there might be a better way. Also does anyone know the fork oil wt. and correct volume for these forks? Thanks in advance, hoping to go riding this weekend.
-
Just got an '04 315r and I am trying to change the fork seals, since the left leg is weeping. I have the left fork mostly apart, the inner tube assembly is out, but I am not sure if the slider and fork tube should be pulled hard to seperate or there is another step or special tool needed. Also if anyone can let me know what wt. fork oil is used and the volume for each leg, I would be most thankful.