Hi folks.
my daughters oset 20 lite has started switching off when you open the throttle. If you switch the kill switch off then back on again the power comes back on until you try and open the throttle again. If the rear wheel is off the floor it will spin the rear wheel as soon as you put the rear wheel down it will cut out
Hi I have a 2010 300 raga which I recently stripped the engine to replace the main bearings and found a cracked casing. I have bought some standard casings not magnesium ones. When I came to put it all back together I found that all the gears are there and fine when going up the box but when I come back down the box it seems to be awkward going into third. The gearbox seems to go tight. Also has anyone had trouble with main bearings being the wrong size. I bought some non genuine ones when I fitted them you couldn't turn the crank so I took them out got a new set from gas gas which were the same. When I contacted gas gas I was told the bearings had been manufactured the wrong size 23 mm deep instead of 22.5mm
Hi. I have a 2010 txt 300 pro raga which I am about to replace the main bearings. As the engine is apart I thought it may be a good idea to change the rings. My question is has my engine got a s3 piston fitted as standard. Also do you think it is a good idea to get the crank balanced while it is out. Thanks
hi everyone! i have a 2004 sherco 125 and have picked up a 200cc barrel and piston.i am going to fit it very soon i was just wondering if anyone out there knows if i will have to rejet the carb and if so does anyone know what a 200 would have as standard jets
thanks
hi can anyone tell me where i can get some fork tubes recoated my friend has a 2006 sherco 290 with black chromed fork tubes and the left one is damaged
hi! my step son has a 2004 gas gas txt 80 rookie. I am trying to get a little more bottom end power out of it. the bike runs really well and pulls like a train at full revs. This ok but steep hills have to be attacked in first gear flat out.. I have read the other posts about the carb mods. The carb slide is all ready modified. I was thinking about changing the front sprocket from a 12 tooth to a 11 tooth has anyone given this a try before and was it any better? thanks!!
hi i hope someone out there can help me i have a 2000 beta rev 3 with upside down forks and i'm replacing the fork seals and i'm trying to find out how much fork oil i need to put in each fork leg.
hi i'm hoping someone can help me. one of my friends has a 1994 gas gas 250 and on sunday we were out on the bikes when his bike starting misfiring and then cutting out. we tried the spark plug it ran for a short while then cut out again.this time it would not start.i've checked for a spark it does have a spark but it is very weak. does anyone have information on how to check the stator.
thanks creaser
hi ! i had a similar problem with a scorpa i used to have. in the end it turn out to be the stator . i had the stator rewound and it started first or second kick every time.
hi could anyone out there tell me how i can tell the age of a beta 250 techno as a friend has just got one but has no real idea what year it is . i think it could be a 95/96 but not sure.
thanks creaser
hi went out on my 2005 gas gas txt 280 pro today towards the end of the day there was a rattle from the gearbox when the clutch was out when i pulled the clutch in the rattle goes away. anyone have any ideas.
hi! my step son and i have just got him a 2004 txt 80 rookie and im looking for some service info can anyone help. owners manual would help
thanks creaser!
hi my name is steve and im from oswestry on the shropshire/north wales border. i have a 2005 gas gas txt 250 pro. my step son and me have have been playing about on trials bikes for a couple of years. he has a ty 80 at the moment. but with a bit saving he is looking for a newer bike.
he is 12 i have been looking at gas gas 80 rookies but a scorpa tys125f has just come up for sale.i was just wondering what people thought.