jgm

Does anybody know where i can get an oversize piston for a TL240 ?

Just put new points and condensor on now the bike now it won`t start. I am getting a good spark but all i get is an occasional backfire from the bike. Anybody got any ideas why it won`t start ?

Went to start my TL320 the kickstart is not engaging i am only getting a clicking sound as it tries to engage. Does anybody have any ideas.what has failed.

The Rubber connector from the carb to the disc valve inlet manifold has split on my TL320 Does anybody now a fix or where a new one can be purchased

I have a 1981 TL 280. Is the air filter soaked in oil on an these bikes.

Oil fouled

I have got SWM 280TL which runs OK for about an hour then fouls or buns out the plug. If I change the plug it then runs OK again. I am using a BP5ES plug. Any advice or possible cure would be great. JGM

Thanks for all the advice.checked points and codensor, put in a new plug and cleaned all the jets in the carb today. Bike seems to be running OK again. I will remount the condensor under the tank next if any further problems. JGM

Just bought a 1981 jumbo bike runs fine for fist half hour the cuts out at low revs.It then will only start using the choke. It runs ok at high revs but cuts out at low revs. Anbody got any sugestions wether the problem is carb,coil or condensor. Any advice appreciated. Thanks JGM