robbierich

the oil leaks out to the point you can just see it right at the bottom of the glass when the bike is level

Get it braised, and it will be fine. Just clean the paint off and v the crack out slightly and take it to your welder a

These are the crank bearings with seals

Around 400ml I think, it's still leaking oil out even when it's dropped down so you can just to say see it through the sight glass

Oil is coming out exactly like it was put in, want to get to the bottom of it as £200 and it's still the same

Recently bought myself a 2009 gas gas txt 280 pro, was fine for a while then it started to leak oil from the crank case breather, so I stripped the engine down and replaced the bearings with the new type bearings from gas gas uk which have the inter grated seals and also the small seal for the magneto side Got a fresh gasket kit and built it back up, started the bike and it's fine for around 15 minutes use then starts spitting oil out of the breather just like it was originally, What do you think the problem is ? Thanks in advance