Jump to content

sprite125cc

Members
  • Content Count

    16
  • Joined

  • Last visited

2 Followers

About sprite125cc

  • Rank
    New Member
  1. Hi Mark if you can let me have details of cutaway on case over gearbox sprocket and what you think is the best carb. Also what chain tensioner do you have on.i would like to talk to you.as you seem to know the 200montesa well any chance of a tel no? My no is 2821993 I am near leeds many thanks Arthur.
  2. Hi can you let me know what jets you use In your dellorto carb on the 200cota.many thanks
  3. Hi if you can let me have any info on the cota 200 that will be great.thanks Arthur.my email address is arthurhemsworth@talktalk.net.ps you may have got this a few times but that's because I don't know what I am doing with this thing.
  4. Hi if you can let me have any info on the cota 200 that will be great.thanks Arthur.
  5. Hi is any good cutting the case away round the gearbox sprocket to help with mud buildup round chain.thanks.
  6. What do class as the hot wire from the coil thanks again.
  7. hi I understand that the condenser can get too hot .can it be moved and if so how and to where?many thanks.
  8. Thanks will have to try it when I get up and running.
  9. Can I remove 2clutch springs to make clutch lighter ?
  10. Montes a 200 cota.that will be great mark thanks for your help arthur.email add arthurhemsworth@talktalk.net
  11. Montes a cota 200 carb.thanks for that do you think you can let me have details of carb size and jettings and slide.many thanks.
  12. Hi what do you think is the best carb for the montesa 200 cota .
  13. Hi is it just a parts manual or does it show how to set the engine up .if it does can you let me have a contact no.many thanks .
  14. Montes a 200cota kick start.i have just got the bike but rode one in the 80s so can't just remember yesterday never mind then .its an age thing.has anyone removed 2 clutch springs to make clutch lighter if so how do I do it as I have not got a manual .thanks for your help sprite 125 cc.
×
×
  • Create New...