snorky29

absolutely....thanks again

just purchased it ...mint...thanks for spotting it Neil

Hi , thanks for the reply...just the arm though ....its the bracket i need to fabricate Neil

Hi I currently have a Bet REV 3 2003 with "NO" side stand......the problem is these side stands are far and few between (i just cant find one).....so can i ask if any members who have the same bike with a side stand can you photograph the bracket and arm in situ from underneath......i am going to fabricate my own bracket and arm but dont have any reference pictures to work off ....it would be most appreciated cheers Neil

Hi, fantastic read and clear instructions.....but can i ask for some clear instructions regarding "leaving a couple of springs out" for a lighter pull is there a clear quantity or just trial and error, is there any specific pattern to removal of the springs why i ask is my clutch is operating fine (no cold stick or snagging) but i would like a lighter pull, so can i remove some springs with out any "mods Regards Neil

i would prefer a snappy clutch and keep the hot weather

Hi, Havnt been inside the engine...this has only happended since the oil change ...i.dont know what the previous owner had used.in the gearbox

Many thanks for the reply, was hoping you said pull throught as that is how it is running Cheers Neil.

Hi all, just a ditsy question, should the cooling fan "PUSH air through the Rad , or PULL air through the Rad ... Cheers Neil

just an update , i purchased Putoline light gear oil in the end , i now find my clutch is "snappy" ....like as i let the clutch out ...or feather the clutch it doesn't engage smooth through the clutch leaver travel, its as if the clutch plates "grab each other now ....anyone experience this Cheers Neil

Just spoken to him and he just sold the last one ....gutted

Thanks my friend...i will message him now

Hi Has anyone fitted a universal side stand to a Beta Rev 3 200cc (year 2003) , if so can you recommend which type originals are like rocking horse sh*t Cheers Neil

No please dont get me wrong im quite happy to spend what i need for the bike to run correctly and safely....its just i have 10 liters of the 75w80 in my garage and wounderd if i could use it in my bike ....i.allways thought synthetic oil was the dogs boll*x.

i will give it plenty of work to see how it performs ??

Good idea...i will give it a go and see

Can i assume the issue would be possibly a dragging clutch....or it is just a cheap fully synthetic oil and will not protect engine/bearing wear

Thats a little confusing ...why is it ok for a 8K car but not for a trials bike ?

FUCHS .....TITAN CYTRAC MAN SYNTH SAE 75W-80 Is the oil in question on the description it doesn't say the equivalent ...but does say "low viscosity" neil

Thanks for the replys lads I will use the recomended oil ...just though i could use what i have in the garage first....got to be honest my clutch operation is silky smooth and wouldnt want to change that...ive only just had the bike so dont know what is in there the bike is a 2003 rev 3 200cc

Many thanks for the reply...can i assume that 75w80 ...is thicker than 20w40 which will cause clutch drag Cheers Neil

Hi My Beta rev 3 200cc oil recommendation is 20w40, i have some gear oil sae 75w80 (10 liters) ...i have looked on the web to see if these fluids are similar but its all to confusing :] any reasons why i shouldn't use the sae 75w80 Cheers Neil