Everything posted by r1chard06
-
Gas gas trialz 1991 delta
Fan motor you mean
-
Gas gas trialz 1991 delta
The person looking at it wanted to no if the generator should produce low volts on idle and higher wen Running as it is on mine are is it faulty
-
Gas gas trialz 1991 delta
The person that looking at it builds choppers from ground up the problem I have is the fan isn’t working once wired up how it should be bypassed thermostat so not that changed a few electrical components it does run wen on a battery
-
Gas gas trialz 1991 delta
Yes to which one
-
Gas gas trialz 1991 delta
-
Gasgas trials 250 fan issues
How can I test my fan wireing if I remove thermostat and join wires fan doesn’t spin if I attach battery spins fine
-
Gasgas delta 250 1991 cooling problems
I’m starting to think it’s radiator as it bypassed thermostat and it’s running wen revs are up but shuts off wen you idle
-
Gasgas delta 250 1991 cooling problems
And yes impelor spins wen liked over
-
Gasgas delta 250 1991 cooling problems
It’s had new water pump shaft seals ect the fan works with battery and now as bypassed thermostat
-
Gasgas delta 250 1991 cooling problems
Think it stops or slows alot
-
Gasgas delta 250 1991 cooling problems
Someone help me out I’m stuck engine keeps boiling coolant after about 20 mins the thermostat has been bypassed chAnged water pump radiator and pipes new head gasket no crack in head so what the held going on also wording been modified to bypass thermostat
-
Gas gas 1991 ? Trials 250
Anyone tell me if head gaskets were different than 1993 model I thought was delta but has coolant tank that only came out on 93 one
-
Gas gas 1991 ? Trials 250
Also you wouldn’t have a wording diagram and info on fork seals change I thought my bike was a 93 as it has coolant tank
-
Gas gas 1991 ? Trials 250
Also you wouldn’t have a wording diagram and info on fork seals change I thought my bike was a 93 as it has coolant tank
-
Gas gas 1991 ? Trials 250
Water cooled I think it’s a delta as looked at pics looks like mine with gold head and gasgas logo
-
Gas gas 1991 ? Trials 250
Anyone no if head gaskets changed around 1991 I’ve orderd a few replacement but there all same and don’t fit there to thin and sit lower than channel there in
-
Re 1990s to 2001 gas gas trials 250
Whenever I order head gaskets the keep sending some what don’t fit there too thin and sit lower than channel also on vids I’ve seen they go on head mine goes on barrel
-
Re 1990s to 2001 gas gas trials 250
The head gasket I got were standard not vitron we’re would I acquire one of these the pump rotates wen you kick bike over haven’t tried fully running
-
Re 1990s to 2001 gas gas trials 250
Having a few issues can anyone help the wording has been messed with to bypass thermostat anyone have a wording diagram as fan only spins on full throttle also we’re can I get replacmant parts as it boiling over after 10 mins use had new head gasket new pipes new radiator pump seems ok so unsure what to check next
-
gasgas 250cc trails bike 1993 gt series help
I right I looked a bit deeper I checked head gasket and seamed fine but I have replaced it I have checked pump and spins fine I have replaced radiator and pipes no blockages there coolant tank replaced still boils over could it be air locked what’s correct bleed procedure for these also although fan has been wired permanently bypassing thermostat I noticed wen you drop revs or ideal fan doesn’t spin fast
-
gasgas 250cc trails bike 1993 gt series help
I forgot to mention that’s it’s had a full top end rebuild
-
gasgas 250cc trails bike 1993 gt series help
The bike itself runs and tides nice no problems there
-
gasgas 250cc trails bike 1993 gt series help
having a few problems with a bike i just bought its leaking from the coolant resevour and the water is boiling it needs a new resevour but gasgas say you cant get them anymore any sugestions and ithink its boiling over becouse tank not presurising its been looked at before as the thermostat has been bypassed and fan runs perminatly ant ideas how to put back to standad im also looking for a water pump upgrade but cant find any info on doing so plz plz plz help