Jump to content

r1chard06

Members
 View Profile  See their activity

  • Posts

    23

  • Joined

  • Last visited

 Content Type 

Everything posted by r1chard06
 
 
  1. r1chard06
    Fan motor you mean
  2. r1chard06
    The person looking at it wanted to no if the generator should produce low volts on idle and higher wen Running as it is on mine are is it faulty
  3. r1chard06
    The person that looking at it builds choppers from ground up the problem I have is the fan isn’t working once wired up how it should be bypassed thermostat so not that changed a few electrical components it does run wen on a battery
  4. r1chard06
    Yes to which one
  5. r1chard06
    Need to find some info out as I am having it looked at
  6. r1chard06
    How can I test my fan wireing if I remove thermostat and join wires fan doesn’t spin if I attach battery spins fine
  7. r1chard06
    I’m starting to think it’s radiator as it bypassed thermostat and it’s running wen revs are up but shuts off wen you idle
  8. r1chard06
    And yes impelor spins wen liked over
  9. r1chard06
    It’s had new water pump shaft seals ect the fan works with battery and now as bypassed thermostat
  10. r1chard06
    Think it stops or slows alot
  11. r1chard06
    Someone help me out I’m stuck engine keeps boiling coolant after about 20 mins the thermostat has been bypassed chAnged water pump radiator and pipes new head gasket no crack in head so what the held going on also wording been modified to bypass thermostat
  12. r1chard06
    Anyone tell me if head gaskets were different than 1993 model I thought was delta but has coolant tank that only came out on 93 one
  13. r1chard06
    Also you wouldn’t have a wording diagram and info on fork seals change I thought my bike was a 93 as it has coolant tank
  14. r1chard06
    Also you wouldn’t have a wording diagram and info on fork seals change I thought my bike was a 93 as it has coolant tank
  15. r1chard06
    Water cooled I think it’s a delta as looked at pics looks like mine with gold head and gasgas logo
  16. r1chard06
    Anyone no if head gaskets changed around 1991 I’ve orderd a few replacement but there all same and don’t fit there to thin and sit lower than channel there in
  17. r1chard06
    Whenever I order head gaskets the keep sending some what don’t fit there too thin and sit lower than channel also on vids I’ve seen they go on head mine goes on barrel
  18. r1chard06
    The head gasket I got were standard not vitron we’re would I acquire one of these the pump rotates wen you kick bike over haven’t tried fully running
  19. r1chard06
    Having a few issues can anyone help the wording has been messed with to bypass thermostat anyone have a wording diagram as fan only spins on full throttle also we’re can I get replacmant parts as it boiling over after 10 mins use had new head gasket new pipes new radiator pump seems ok so unsure what to check next
  20. r1chard06
    I right I looked a bit deeper I checked head gasket and seamed fine but I have replaced it I have checked pump and spins fine I have replaced radiator and pipes no blockages there coolant tank replaced still boils over could it be air locked what’s correct bleed procedure for these also although fan has been wired permanently bypassing thermostat I noticed wen you drop revs or ideal fan doesn’t spin fast
  21. r1chard06
    I forgot to mention that’s it’s had a full top end rebuild
  22. r1chard06
    The bike itself runs and tides nice no problems there
  23. r1chard06
    having a few problems with a bike i just bought its leaking from the coolant resevour and the water is boiling it needs a new resevour but gasgas say you cant get them anymore any sugestions and ithink its boiling over becouse tank not presurising its been looked at before as the thermostat has been bypassed and fan runs perminatly ant ideas how to put back to standad im also looking for a water pump upgrade but cant find any info on doing so plz plz plz help
 
×
  • Create New...