Jump to content

RossRT

Members
  • Posts

    5
  • Joined

  • Last visited

Contact Information
 
   
  1. Blimey, I didn't think it was possible to put the filter in backwards... where would the little spring go? I will double check though, as it had it's first service at the dealer before I picked it up. Looks like I'll have to pull the thing to bits in the morning, valve cover is a lot easier to get to on the 4RT than the 4R...
  2. Hi all, I've got 2020 4ride with only 100 miles on it has developed a tapping from the top of the engine. It only happens after 10-15 mins of riding when it's hot. It's most noticeable when the bike is idling and sounds like someone is tapping a spanner against the top of the engine. My 4rt has never made this noise. Before I start taking the thing to bits or starting a warranty claim, does anyone have any ideas? Could it be valve clearance? Oil not getting to the valves? Hopefully won't be anything serious with the bike being so new... Cheers Ross
  3. Being a bit of a short a***, I'd like to lower the suspension on a 4ride. Anyone had any experience of this or have any suggestions? Also would there be any issue in putting forks and shock from a 4rt on it? Cheers
  4. Hi All, Anyone know off the top of their head what size the axle bolt / nut is on a Standard 2017 4RT? I seem to recall it's 24mm but can't be sure. Cheers
×
  • Create New...