Everything posted by Erky181
-
Bent frame
What was the out come mine has done the same as this
-
Help needed 300st won’t start
I called the splatshop , and told him my symptoms and he advised changing crank seal , it’s running fine now , I think I’m going to replace the float valve and float as cheap parts hopefully it will be fine now
-
Help needed 300st won’t start
No I’ve not laid it over at all
-
Help needed 300st won’t start
Sounds like this rear tank set up is rubbish no wonder they changed back to front tank
-
Help needed 300st won’t start
So finally got it going , still not sure what’s wrong but ... changed crank seal and nothing , so started stripping it , took exhaust off and it was full of fuel , as the bike is new to me i May have left fuel on. , some how it’s flooded the bike , some things wrong but at least it runs now ... going to buy few new parts for the carb , at one point this week I had fuel coming out the overflow pipe so had carb apart about 3 times
-
Help needed 300st won’t start
I have cleaned carb out several times not touched reed block yet , will check the throttle cable and see
-
Help needed 300st won’t start
Pretty much tried all that mate been on it two days now
-
Help needed 300st won’t start
So just picked up a 300st 2015 bike was running went out all day had few issues with it stalling on hill descents , it didn’t start super easy 3 or more kicks , so go it home washed it started it ... put it away for 4 days got new plug drained fuel tank added fresh petrol ... trying to treat her nice now bike is just dead not even a chance of firing nothing I have a solid spark , I have fuel in the carb Lean the bike and fuel comes out the overflow , plug is wet on kicking the bike over .. unplugged plugs and connections , disconnected the kill switch no change really stumped any help appreciated , other are pointing to crank seal just can’t believe that had solid day on it 4 days ago ??♂️ thank John