Everything posted by Robert 65
-
Montesa 248 oil from exhaust
Hello Will try altering the ratio also I've purchased some good quality oil much appreciated
-
Montesa 248 oil from exhaust
Morning Thank you for your reply. Will try it later on today. Much appreciated Rob
-
Montesa 248 oil from exhaust
25 to 1 what oil should I add to the petrol
-
Montesa 248 oil from exhaust
What oil should I add to the petrol
-
Montesa 248 oil from exhaust
Thank you for your reply Never had this running before Owned for years Feel happier now Thank you
-
Montesa 248 oil from exhaust
Running 25 to 1 What oil should I add to the oil
-
Montesa 248 oil from exhaust
Morning Many thanks for your reply. Feel much better reading this. It's been stood in garage for years Has mentioned I changed the crankshaft seals that were rock hard. New oil,plug, points etc Started straight away. I'm running 30 to 1 What oil should I add to the petrol,? Best regards
-
Montesa 248 oil from exhaust
Hello Many thanks for your email. Thank you.
-
Montesa 248 oil from exhaust
Evening Many thanks for your information. How do I remove the obstruction? Is it carbon the obstruction? Once again thank you. Stay safe and well.
-
Montesa 248 oil from exhaust
Hello I was having oil coming out of the exhaust. I've changed the crankshaft seals No improvement Petrol/oil ratio not the problem Any thoughts
-
Montesa 248
Much appreciated Thank you Best regards Rob
-
Montesa 248
Morning Many thanks for your email. Will give it a go. Thank you
-
Montesa 248
I have a Montesa 248 Currently in the process of changing the crankshaft seals. I have been able to access the seals on the Magneto side but having problems with the clutch side. I am aware of the possible issues in removing the primary gear but at the moment I am unable to remove the nut on the crankshaft. I know the Magneto end is left hand thread but what thread left or right is the clutch side. I've tried moving it won't move at all Any ideas thank you