Report Montesa Type Style for Tank Logo in Montesa Posted October 29, 2020 What font is this? Or a close one? Bob Tucson
Report Relocating condenser in Montesa Posted August 13, 2020 Have a 67 LaCross with a Cappra 250 63M motor. I am relocating the condenser to the coil area and away from the heat under the flywheel. Any suggestions? Should I use stock condenser or can I just use a automotive one? Bob Tucson, Az
Report Help on OLD Montesa LaCross Please in Montesa Posted August 12, 2020 Hi FT Welder. On my Montesa Cappra I would like to take the condenser and relocate it to the coil area - to get it away from the heat at the crankshaft. Your thoughts on this - is this an remedy. Is coil and system on 67 Cappra 6v or 12v coil? Or something else? Thanks for any help. Bob TucsonI
Report Help on OLD Montesa LaCross Please in Montesa Posted May 8, 2020 Bob - New from Tucson, Az 67 Montesa LaCross I pulled the Montesa out of the garage after 25 years due to a different location. Life just gets in the way. What amount of oil do I put in front forks on each side? How do I hook up the condenser? Which side of coil? Does wire coming out of engine go to positive side of coil? Bike has set for 25 years - still turns over well. Do I understand that there might be an issue with starting because of the magnets inside of the flywheel. Do they loose their magnetism ? Is there a procedure to start this for the first time? Thanks for your help in advance.
Montesa Type Style for Tank Logo
in Montesa
Posted
What font is this? Or a close one?
Bob
Tucson