Trials123

Thanks Casco. I managed to find a thread that said the lower they are the less the front wheel will wash out, the higher the mote stable it will be.

Hi, I want to adjust my Showa shock rebound, to make it more hoppy. I've set the pre load to 80mm sag as advised by a friend. I can't find instructions online for how to correctly set the re bound. Can anyone point me to a technical document? Or give advice for re bound setup? Any help would be greatly appreciated.

Hi All, I've recently bought some tech forks for my Beta Evo 2020, with S3 yolks. I've managed to installed them fine but can't find any instructions as to the right height for the stanchions in the yolks. There is a ring at the top of each tube, I assume this needs to align with the top of the yolk? Does anyone know? Also, for anyone interested in doing the same upgrade, you need a 9mm thick M20 spacer for the axel (brake caliper side) and x2 5mm thick (ish) spacers for the brake caliper bolts. I made the wheel spacer by buying a 4rt spacer and cutting it down. The beta evo also needs an O ring under the bottom headstock bearing.