[Serow]

i am looking for a rear wheel for my serow

they seem to be like hens teeth- except rounder with more spokes- ahem

i look forward to hearing from you

kind regards,

andy.

[Ty Pinky]

how goes my like minded and distant friends?

Bought myself a mono ty 250 pinky and i cannot for the life of me trck down a workshop manual

Haynes or otherwise.

Has anyone out there in cyberspace have any suggestions?

andy bone.

[How Can You Repair...]

totalshell

cheers for your advice/

a needle file would be a good start

but i never thought about reducing the gap though

nice one

i am always pretty skint truth be told

however even if i had loads of spare cash i would always

try and repair everything- not only are you saving the planet

but you see exactly how something works.

i ride old ty`s my latest is a pinky

and what i lack in sleek power and finesse

i gain with sheer courage and determination brrrrmmmm!!!!!

cheers again

i`m away out to the shed to fix my pinky!

andy bone.

[How Can You Repair...]

gear lever or the kickstart come to think about it but mainly the gear lever .

you see its rounding on me.

i have used already a screw whiched worked for a while

and now i wonder if i should drill through the lever and shaft

and bolt it?

what does anyone think?

cheers now

andy bone.

[Ty Piston Replace And Cylinder Rebore]

How goes my like minded distant friends?

well since i last posted anything i have bought myself a couple of new bikes.

still ty`s but now i am the pround owner of a ty 250 pinky and a ty 80 small wheeled for my son.

However there is a problem. the pinkey has the loudest clattering engine i`ve ever heard.

i still have alot of power, alot more than the 175 i`ve been riding, it certainly does put a smile on my face even now as i write this post!

So anyway back to the point.

does the clattering engine mean that i should need to replace the piston and rings and then rebore?

And if so where would i send it and how much might it cost?

i look forward to your respected views and replys

andy bone.

[Midi Dirt Bikes]

for the record

these mini motos and dirt bikes are basically rev and go

they share the same engines as strimmers

so if the engine revs but does not turn the front sprocket it has to be either

1 the gearbox

2 the clutch

in my case it was the latter

simply a spring had come loose on the clutch

- unfortunatley it go mangled so i have to buy a new one

the good thing though about these chinese imports is that

all the spare parts are as cheap as chips.

but i cant help to thinking i1m gonna need alot of them!

see ya now

andy bone.

[Anybody Had A Rear Wheel Rebuilt On A Ty250 Mono?]

mmm wheel rebuilds expensive!

what i did to my ty rear wheel is

1 scrape away all the crud around the wheel

2 cut the old inner tube to fit around the old freshly scraped rim

3 gaffa tape the old inner tube so it will not move

4 purchase a can of goop - puncture prevention goo

5 fit new inner tube over old one

6 fit tyre over inner tubes

7 squirt goop into inner tube

8 inflate and ride

9 the goop guys say it will last for 50,000 without a punture

i did mine a few months ago and havent looked back.

granted most things i do on motorbikes is on a budget

but hey if it works - it works

oh! and i trial quite hard - jumps and crashes etc.....

good luck anyway whatever you do

the most important thing is get the wheel back on the bike

lie to your boss about dentist etc

and get out there

[Midi Dirt Bikes]

funny one- all i did was just as you said and

"roberts your dads brother"

nice one!

andy.

[Who Can Help Me?]

swing arm is as good as in the back

thanks everynoe for all your help and advice

it really was above and beyond the call of duty

andy.

[Midi Dirt Bikes]

well am i glad i joined this forum.

today has been full of mixed emotions.

i secured and payed for a swing arm for my ty - joy

however i was giving my sons` midi moto a wee service and found the front sprocket does not turn even with me on it and revving the a*** out of it.

i could get it to free off evey now and again and when it was free it seemed fine but in my trying i have now popped the tyre and inner tube - the tyre must be about 2mm thick

i am prepared for dogs abuse about buying a chinese import

i also dont know why it will only run with the choke out/on.

the build quality and parts are pretty cheap but it does the wee fella fine when its going. we just go up and down the forestry tracks and he loves it.

hes still too wee to go on my ty175 and i thought that this would at least get him a feel for dirt bikes and it was within my budget. however budget seems to be the operative word!

any spanner nuts out there?

please help me .

andy bone.

[Who Can Help Me?]

2747 dale

nice one my friend

I emailed the" barrel guy"who said he`d sell me one.

i hope something nice happens to you

kind regards

andy bone.

[Who Can Help Me?]

i have recently found a quarry just 1 mile from my house and have made my missus a trials widow( once or twice i thought i actually came a little too close to making her an actual widow but i never told her)

i have just put a 52 tooth sprocket on the back and wow what a different machine.

Now for the "oh no" bit. I was climbing up one of the scree slopes when i thought my chain had come off and we had a wee slide down the bank. At the bottom i realised that the chain had come off - because i had snapped my swing arm.

My question to the group is where the hell am i going to get a new swing arm for a ty175?

And can you weld swing arms to any effect?

i`ve got to get it fixed so i can get back out, i`m already feeling stressed and need to get back out to master the quarry.

please help

andy bone.

ps. great forum!