UK Trials Talk

Hi all I have just moved to wiltshire (near chippenham) from tyneside and wondered if any of you know of any trials practice areas that are 'legal' to ride on. any help would be appreciated because I DO need the practice! thanks guys rich Thought Id get this posted before I leave for sheffield. Hospitality suite here I come.....Get up there dougie...plenty time......come on!!!

Looking for some advice please. I've striped my daughters txt125 07 engine to replace all the bearings, I've come to close casing up but as soon as I get them approximately 5mm or less from closed together the gearbox locks up, I've been through the gearbox diagrams multiple times and everything look right and turns freely prior to that last few mm. The only thing that looks odd to me is the way the clutch shaft butt's up against the casing needle bearing without a washer, up there wasn't one in there and there's non in the diagrams, any advice would be appreciated.

Hi, just looking for some inspiration. Took my back wheel off to replace the wheel bearings and noticed the swing arm linkage bearings are absolutely shot and some play in the main bushes too. I've sorted the dog bones out no problem, however the 2 roller bearings in the main arm that the long linkage bolt goes through will just not budge nor will the bushings in the end of the arms. Can someone tell me if there is a step inside the casting or can both bearings and bushes be pushed out from the same side? I've tried a little heat with a warm air gun but no success at the moment. Obviously I don't want to damage anything but just looking for a bit of info Thanks

In my "spam" folder this morning ticket discounts - looks like the GP is in UK again next year after the fantastic event at Kettering this year. The 26 event will be in Anglesey at the venue that was cancelled the last time round. I hope they get it right this time.

Hi all, Beta Evo 2009 250 2T owner, but too many pies mean I am about 100kg. The shock is almost bottomed out with my weight on it, maybe at 16 years old the spring is tired, as well as being too light for me. I think I can get a 'heavy duty' spring new for around £90, but these are stated as being for 80kg riders. Can anyone recommend what I need, and where from? Ideally... has anyone got a second hand heavy spring I could buy? I am in Scotland by the way - but happy to pay shipping.

Hi Had a look at my clutch tonight as it is terribly rattly which I know these bikes are known for it. I found these 2 chips on the idler gear would they have any effect on the noise? I guess the bart gear looks a bit tasty too, although it kicks up on 2nd kick from cold and 1st kick when warm. The clutch basket and plates all look sound. I was worried the clutch basket would be worn out but it looks good. The only other thing I have noticed is the bush/bearing on the shaft going to the gearbox has some play in it. I've tried to attach a video but it won't upload for some reason. It all seems to work ok but I get quite a bit of vibration through the bars too. Any …

I need a new tyre pressure gauge. I've just broken my Apico 0-15 psi one by putting it on a new tyre that had been left at very high pressure. As I don't have a separate gauge for my cars, I am thinking of getting a digital gauge that would do both. I'm proposing digital because it will still be readable at normal trials pressures, but does it actually read accurately down at 2.5 psi? Any opinions? Any recommendations?

Have taken up the challenge to restore a cota 200 has anyone got or know where I can source the nut and woodruff key which holds the front sprocket. Cheers

How much putoline nf radiator coolant do I put in my 2003 sherco 250? Also how do I drain the old stuff out?

Does anyone know where I can find parts for my little Cota 25a I am looking for a donor engine or all the parts for the kickstarter. Shaft, kicker, and all the parts on the shaft. I’m trying to bring this little bike back to life. The kid that wore it out then wants it for his grandkids now. Any help or advice would really be appreciated Robbie

Hi all, could anyone recommend a trials bike workshop/mechanic in the south wales area please, Having gear selecting troubles, 1st and 2nd gear is fine then it's really hard to get into 3rd then shifts fine again through the rest of the gears and is almost impossible to find neutral when engine is running Thanks Gasgas txt300 2015

I've noticed that some of our colonial cousins quote the type of route they ride as if it is a standard format. If only we could have something like that in the UK! Every club seems to have a different idea of hard, easy, clubman, sportsman, novice, beginner, gentleman, etc. Most clubs use red/blue for the "main route" but that could be the hardest or the middle route and the use of white and yellow is all over the place. I've also seen red and blue as separate routes. Finally, some clubs mark out deviations from the main route while others mark out all routes in their entirety. Wouldn't it be nice if all clubs worked to a standardised system, at least up to Centre C…

Does anyone know where my boys could ride their electric trial bikes? (Legally) Preferably where there’s obstacles like the woods so they can practice balance ect Near to where I live Lichfield (Staffordshire) thank you

Hi new to the group and just getting back in to trialling been about 30yrs the last time I went out properly 61 now lol went to frys bottom last month with my son who's 27 his 1st time which was great nice lot of guys but only once a month and on a Saturday can't all ways do Saturday. So looking for other places to go to around my way I'm at Churchill nr cheddar bs405eg any old bit of land would do would pay of course Cheers cary

Hi, I have a 1976 TL125S and I have been looking for a middle arm that forms the pivot joint in the rear foot brake assembly. I have tried far and wide to get NOS or used part. Does anyone know if another part might fit or can be modified to do the job? Thank you

Hi so I'm after a back mudguard for a 2008 beta. Anyone got any please. Cheers

Does anyone know anything about the Tottenham Trophy Trial? I'm researching the racing career of J.E.C. Purnell (John), and he was awarded the Novice Award cup for the 1947 Tottenham Trophy Trial.

"Two rule changes were unanimously approved at the meeting to take effect from 1st Jan 2012 and apply to all South East Centre Championship Trials. All trials are to be set out to be run under TSR22B Non-Stop and the combine will identify a method of determining a

Hi all, Its been a while ( 16 years in fact)😲 Well I have started riding trials again as I've recently bought a Mecatecno Dragonfly (what a machine !), so I want to start riding trials again but I wondered what is the best way to find out what is on? Ive looked at the ACU.sport80 site and I have looked on here, but when I talk to some other trials people, they mention trials in clubs that I dont see posted on these sites. I live in the Telford area and looking for a 50 mile radius. Any tips where I can get info ( I'm currently a member of South Shropshire and Llangollen Trials clubs) Thanks in advance

Toby has to be so pumped beating Bou by a point tonight! Big deal, so it was not a world round A win is a win!