[Head set Bearings]

I have a 2005 4rt and was wondering if anyone has the bearing # for the head set bearings? or are they the same bearing used on newer 4RT ?

[Kick Starter on TY175]

Have seen on some ty175 they have replaced factory starter arm with a al one! Does anyone know what they used ?

[TY175 triple clamp bearings set]

Saw that you can replace stock triple clamp (loose stile balls) bearing with new contain ball roller bearing .  Was wondering if anyone has new stile roller bearing number.

Thanks

[TY 175 Rear Shock Top Mount Mod]

Is yhere any info on what size shock that was used and how far they where moved ?

[TY 175 Rear Shock Top Mount Mod]

I have notice that the rear shock top mount have been moved down . Does anybody have info on this mod ?

Thanks

[Ty 80 1974]

Was wondering how much oil and what wt oil should I use in the TY 80. Also does anyone know where to get factory manual also ?

[Fork oil wt and how much oil]

Was wondering does anyone know how much oil per fork and what weight ?

[Tlr 250 Sprockets]

I have a tlr 250 and was wondering what front and rear sprockets riders are using on them. I have 9 tooth on front and 41 in rear now

[Tlr 250 1984]

Was wondering if anyone knows how far above triple clamp should forks be?

Thanks

[Wheel Base Of A 1974 Ty250]

anyone know what stock wheel base was??? and where you can down a manual for bike

Thanks

[Ty 175 Tank Alternatives]

Try this stuff cleaned to ty tanks with it and they are like brand new inside

Rock Hopper

http://www.rusteco.com/

[Tubeless Tyre On Tubed Rim]

Have a Dunlap on my TLR and it works great

[Flywheel Puller For A Tlr]

Think I found out that it is a 16mm 1.5 RH thread bolt ???

[Flywheel Puller For A Tlr]

Was wondering if anyone know what the tread size is for puller or where you can buy one

Thanks

[Tlr Starter]

Have found that this somewhat a common problem with these bikes to fix you have to replace starter gears

Mike

[Tlr 250 And Tlr 200]

I have found out that the gears work on ether engine. The hard part is finding a head gasket for the 250, most are modifying the 200 gasket to work on the 250

Mike

[Tlr Flywheel]

Is the bolt on a tlr that holds flywheel right hand or left hand thread

Thanks

[Tlr 250 And Tlr 200]

Have a tlr 250 and was wondering if the starter gears are the same on both in the states I can get parts for the tlr 200 and I need to fix starter gears on my 250

[Tlr Starter]

Have a 1984 tlr 250 sometimes when I try to start it it skips on engagement and dose not return. It doesnt do it all the time any ideas

[Rock shocks]

Does any one know how much oil to put in a rock shock and what oil wt

[Tlr 250 plug]

Needle is at lowest position now was 3 up but bike did not idle right at that position. I have it already at lowest position and the bike idles fine and runs great but plug is sooty.

[Tlr 250 plug]

I have a tlr 250 1984. Have stock carburetor with stock jets, but have noticed that plug seems to be sooty. The bike seems to run great so was wondering is this normal for the plug to run like that on these bikes.

[Stock jetting on a tlr 250]

Was wondering what was the stock jetting on a tlr 250 ( what size were they)

[RTL 250 head gasket]

Call Adrian at Lewisportusa

[Geritol]

Does anyone know who won the Geritol trials