ledref1

Just a response to enhearten those Beta brake bleeders, it is possible to bleed the rear brake in the conventional fashion. Well, perhaps slightly modified conventional fashion. All it takes is a special tool - patience! Remove the rear wheel so you have room to woork, keep the reservoir uncapped and topped up, pump the brake pedal gently, and before opening the bleed valve, slowly move the caliper (up, down, sideways, etc.). After doing this a few tmimes, I have found that letting things sit for 15 minutes is also very helpful. In words, take full advantage of that patience tool. All other things being okay, the air will bleed and brakes will appear. Good Luck!