Some advice please as the instructions although simple are not clear.
I'm fitting to a bare crank. The kit has a small spacer. Do I fit this behind the sleeve and rotor, touching the primary or under the crank nut. The choice will of course move the rotor outwards by about 5mm. Any assistance welcomed
With a bit of time on my hands at the moment I thought I’d have a go at fitting may new ignition to the Cub and tidy up a few loose ends. I really need a new exhaust pipe but can’t seem to find any in stock with the usual suppliers. So is there anyone that knows where I can find a high rise. inside the frame pipe. If anyone has a spare?
Thanks for the replies. Can I also ask what length rear shocks people use on trials Cubs. Mine look too short. I'm looking at the Betor jobs. Any good or is it Hagons or NJB?
Electrex World Igntion for Cub
in Pre-65 Bikes
Posted
Some advice please as the instructions although simple are not clear.
I'm fitting to a bare crank. The kit has a small spacer. Do I fit this behind the sleeve and rotor, touching the primary or under the crank nut. The choice will of course move the rotor outwards by about 5mm. Any assistance welcomed