[Need New Rim For Honda Tlr 250]

I fitted a tubeless rim from a 315r. Bought a second hand wheel and was even able to re-use the Montesa spokes and adjusters.

So the spokes from the 315r fitted the TLR hub? Very interested in this as I was hoping to fit a tubeless rim on my TLR 200.

[Need New Rim For Honda Tlr 250]

I fitted a tubeless rim from a 315r. Bought a second hand wheel and was even able to re-use the Montesa spokes and adjusters.

So the spokes from the 315r fitted the TLR hub? Very interested in this as I was hoping to fit a tubeless rim on my TLR 200.

[Rtls' Titan Frame...]

WOW! Brilliant, I wouldn't know where to begin.

[Rtls' Titan Frame...]

Splendid work, truly impressive.

 

[Tlr 200 Gearing]

Old tread but still very useful - just bought a TLR myself.

[Shocks For Tlr200]

Thanks everyone that's just the sort of input I'm looking for.

[What To Look Out For When Buyin A Tlr200?]

Just bought a TLR! Yes the rims had started to rot a cup brush on an angle grinder shifted it quickly enough!

Starting to go through the bike, cleaning and replacing bits as I come across problems, old posts are useful.

[Shocks For Tlr200]

I'm 4 stone lighter, does having the shocks canted over from vertical increase the force or decrease it?

 

[Shocks For Tlr200]

I was also thinking of getting a Shedworks cherry bomb exhaust header pipe, anyone got any experience good or bad?

[Shocks For Tlr200]

I've recently purchased a TLR200, It needs new shocks, what spring rates have people gone with? 40 or 50 lb springs?

I was looking at getting these: http://www.smproducts.co.uk/products/suspension?page=shop.product_details&flypage=flypage.pbv.v9.tpl&product_id=601&category_id=25

 

 

[Rear Inner Tube & Clutch...trying To Restore My Sy]

My tyre is still good after the SSDT advise - holds pressure for a trial with no problem - even at 3 psi for a muddy trial but goes flat between times.

 

I see my previous link no longer works!

Here it is courtesy of Motomerlin.

 

Beta-Evo-2011-SSDT-Tips.pdf

[Scorpa Newbie]

I use 75:1 oil ratio, I find it runs well and not smokey. PJ1 oil.

[Tl125 Rear Shocks]

David Silver?

[Just Bought This Tr 34]

I'll investigate the TR34 more carefully. The XL 250 engine could be sold on...

 

Forks - what weight oil and how much? Do you measure a volume or distance down from the top of the fork tube with/without springs inserted.

[Just Bought This Tr 34]

Original plan was to use the forks, wheels, brakes, bars etc for a little twin shock project that's on the back burner at the moment.

[Just Bought This Tr 34]

Bought this last week.

Suspension  linkages at the rear are very loose, no bearing in the top of the steering head & the front wheel is badly buckled, oh and the engine doesn't run either.

 

[Hub For Tubeless Rim.]

Do Z spokes preclude lacing a TY hub to anything else?

What are Z spokes anyway?

[Tl125 Pipes]

Thanks tlrmark!

[Tl125 Help]

Should there be any end float?

[Tl125 Pipes]

Another exhaust question.

What's the OD of the header pipe on a TL125?

Thanks

[Reving When Running Our Of Gas]

Keep the fuel topped up!

[Xl250S Header Pipes]

Thanks Bashplate that's a start.

[Xl250S Header Pipes]

Anyone know the OD and lengths (approx) of the twin pipe headers on this engine?

["my" Rtls]

Am I being daft? I see no pictures!

[Front Sprocket Interchangability]

Hi mike will the 520 chain clear the gearbox oil seal with the small sprocket Stan

11 toot sprocket arrived from Talon very promptly, fits beautifully.

I hacked the frame about and the engine sits in with the gearbox output nicely lined up with the swinging arm pivot.

I might re-do the bottom tubes though - bit messy looking. Next on the to do list are some engine mounting plates.