Jump to content

yamxj

Members
  • Posts

    32
  • Joined

  • Last visited

Everything posted by yamxj
 
 
  1. yamxj

    clutch draging

    the lever feels ok but the master cylinder looks like it has had a few knocks do you think changing the fluid and starting again could make a difference and what fluid do i need
  2. yamxj

    clutch draging

    yes i replaced all the plates yes it dose creep forward i am thinking it could be the push rod that is worn i just dont know what to try next
  3. yamxj

    clutch draging

    thanks for that i will give it a try ( sorry for the delay computer been down)
  4. yamxj

    clutch draging

    hi chaps the clutch on my 2000 txt 280 drags quite a bit i have put a new set of plates in bled the system tried adjusting the lever but it still drags though not as bad as it was the new plates have been in about three months riding the bike its not too bad but to roll down hill with the clutch in the back wheel just slides what els can i look at could it be the clutch basket or the springs at fault ANY IDEAS PLEASE
  5. hi mate i have got the same bike my folk legs are the same there are little holes in the gold top part for the special spanner to fit in but did nt have one so i put the leg in a vice and used a small punch and tapped it round was easy enough
  6. yamxj

    280 Flighwheel

    thanks for that a mate of mine has dun exactly what you said another friend is going to re tap it and make me a new pull for the new thread
  7. yamxj

    280 Flighwheel

    hi guys i am new to trials and have bought a 2000 txt 280 that needs work first job is crank seal but the old owner has tried and damaged the thread in the flighwheel is there any way to get it off HELP !
 
×
  • Create New...