April 19, 200719 yr I have a 05 290 Sherco and it goes into reverse at least once every trial. Any help with problem would be much appreciated. Edited April 19, 200719 yr by casper
April 19, 200719 yr The ignition timing is too far advanced, see Sherco website for how to retard it.
April 19, 200719 yr Author The ignition timing is too far advanced, see Sherco website for how to retard it. Thank you very much for your help.
April 19, 200719 yr Author Yes I agree with Glenn, too far advanced also make sure the woodruf key on the shaft ahs not sheared!Big John Thanks for your help.
April 19, 200719 yr I have a 05 290 Sherco and it goes into reverse at least once every trial. Any help with problem would be much appreciated. It only happens on mine when its reved in neutral - is that the same problem?
April 19, 200719 yr Author I have a 05 290 Sherco and it goes into reverse at least once every trial. Any help with problem would be much appreciated. It only happens on mine when its reved in neutral - is that the same problem? No when I stop in a section and pull clutch in occasionally when I let the clutch out again it goes into reverse.
April 20, 200719 yr I would agree with above comments, but seems I recall another fellow a while back said he fixed it with a stator replacement. Ck the woodruff key first, and the stator plate position. But it does lead me to believe that the the ignition module(coil pack) may be very sensitive to disruptions sent by the stator , as it really does not know which way things are rotating! Never seen it myself, but that is why we share here! Let us know!
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.