February 12, 200818 yr Did you get your shock apart? Just qurious, still not sure if it is the same as the '07, has anyone taken the spring off the newer ones?
February 13, 200818 yr Hi copemech, Yep, on my 06 Shock. I got the spring out with ease, once I'd dropped the spring down and removed the wire/clip thing. I've not touched an 07 Shock, so I can't comment. But it would be easy to check, once you've dropped the spring. Best of balance. Neo
August 1, 200818 yr Hi copemech, I think it was you that put up a post some time back about fitting an 07 hock to your Sherco and were not clear which way up/around it should go? Anyway. I bought an Cabestani Rear shock off of eBay a couple of weeks ago. But I can't see how I can fit it and make the rebund adjusting screw easily accessible on my 06 250. At the moment I've got it fitted at the top. towards the exhaust box. Which really means I'd have to remove the exhaust box (or Air Box) to get to the screw. Am I missing something??...or was this an odd way to design a shock? Best of balance. Neo
August 1, 200818 yr Hi Neo, With the rebound screw at the left/ lower/back you will be able to get at it without taking anyting off. It's a little tricky but achievable. Hope this helps as I had your worries initially.
August 9, 200818 yr Hi copemech,Yep, on my 06 Shock. I got the spring out with ease, once I'd dropped the spring down and removed the wire/clip thing. I've not touched an 07 Shock, so I can't comment. But it would be easy to check, once you've dropped the spring. I can now confirm that it is the same as the 06 Shock. Best of balance. Neo
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.