jon v8 Posted August 25, 2010 Report Share Posted August 25, 2010 A friend has just managed to get hold of what appears to be an ex works 37AT. We are looking for more info than the limited amount I can find in Roy Bacons books.(Postwar singles and Classic two stroke trials bikes.) The bike is 99% complete and looks original apart from the exhaust. Any help would be appreciated,cheers. Quote Link to comment Share on other sites More sharing options...
big john Posted August 25, 2010 Report Share Posted August 25, 2010 PM me John I think I have most of the AJS Andover factory registrations for the 37AT here somewhere! Big John Quote Link to comment Share on other sites More sharing options...
cleanorbust Posted August 25, 2010 Report Share Posted August 25, 2010 As an additional question in this quiz, can anyone remember who rode works AJS 37a's? Malcolm (and Tony?) Davis, Ray Sayer, Norman and Derek Edgar come to mind. Quote Link to comment Share on other sites More sharing options...
jon v8 Posted August 25, 2010 Author Report Share Posted August 25, 2010 Had another look at the bike this evening,its the one that Malcom Davis - or perhaps his brother Tony rode.There is a picture of it on p5 of vol 3 of twenty yrs of twinshock trials.It is not quite as original as I first said,the motor is now sporting a Greeves square fin barrel/head and a conical front hub.But still possibly an interesting/important bit of trials history. Quote Link to comment Share on other sites More sharing options...
honda_trials Posted September 28, 2010 Report Share Posted September 28, 2010 Had another look at the bike this evening,its the one that Malcom Davis - or perhaps his brother Tony rode.There is a picture of it on p5 of vol 3 of twenty yrs of twinshock trials.It is not quite as original as I first said,the motor is now sporting a Greeves square fin barrel/head and a conical front hub.But still possibly an interesting/important bit of trials history. I have a 37AT in pretty original condition apart from a missing seat. I have had a repica exhaust and side panel made, had the tank done and some plating so far, it's a project a bit down the list! I have some photos of one in Devon if it's any help? I also bought a brochure from Big John a while ago but there is little information in it. I think I may have an airticle from a 1969 magazine I coulds scan you if you are interested. PM me if I can help at all. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.