supermotodaz Posted April 28, 2011 Report Share Posted April 28, 2011 (edited) Just rebuilding a 280 pro 07 model, got a question , there,s two o-rings on the output shaft, do these both go in from the outside after the bearing, i know the 1.5mm one sits in the spacer but its the 2mm o-ring i,m not sure on. Any help apreciated. should have paid more attention when i pulled it appart. Edited April 28, 2011 by supermotodaz Quote Link to comment Share on other sites More sharing options...
richt Posted April 28, 2011 Report Share Posted April 28, 2011 I put both on the outside. As you say the 1.5mm one fits in the bush resess and put the 2mm one on the shaft first next to the bearing. the parts drawing shows it this way so I copied that! Quote Link to comment Share on other sites More sharing options...
supermotodaz Posted April 28, 2011 Author Report Share Posted April 28, 2011 I put both on the outside. As you say the 1.5mm one fits in the bush resess and put the 2mm one on the shaft first next to the bearing. the parts drawing shows it this way so I copied that! Thanks for that ,i was hoping someone would say that as it,s back together now. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.