Jump to content

bsa b40 jumps out 1st gear


bobtlr
 Share

Recommended Posts

Hello,

my bsa jumps out of 1st gear, it has been running for 5 trials since opening the engine without problems.

now suddenly it jumps out of first gear what could be wrong?

2nd gear seems to be fine 3th and 4th too.

when i run around in low revs it seems to be fine but when i go uphill and give it some throttle it jumps in neutral

it doesnt make scary noises just clik and out of gear.

anyone can give me some hints where to start? i need the bike next weekend for a trial so i have to work fast.

anny help apreciated!

best regards bob

Link to comment
Share on other sites

 

I'm struggling with a similar issue on a C15. See the post above. I have it apart again and noticed that the shift forks look interchangeable. Could you have switched yours when it was apart. One may be bent or worn differently than the other.

Link to comment
Share on other sites

 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...