Jump to content

Front wheel alignment


davidm
 Share

Recommended Posts

Whilst rebuilding a 1956 Greeves, I've noticed that even though both front and rear wheels are lined up (i.e. for the MOT) the front one appears to be to one side when viewed whilst sitting astride the bike, and when measured it's about 1/2" closer to the right fork than the left. Has anyone knowledge of this with a Greeves or indeed any other model? Can it be normal?

Many thanks,

David

Link to comment
Share on other sites

 

 
 

Thanks for that. I'm going to check again with my straight edge.

David

Hello, If you look at any Bultaco front wheel it is always closer on one side usually the brake side. This is on all offroad model Bultacos. Bully Lover.

Link to comment
Share on other sites

 

Thanks for that, though before I do anything I'll check again with my straight edge

I dont think that would be normal for any two wheel bike David. Adjust the spokes until the wheel is centered between the fork legs.

Link to comment
Share on other sites

 
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
 Share

×
  • Create New...