haggi961 Posted January 21, 2012 Report Share Posted January 21, 2012 Hey all, ive just stripped my beta evo to get all the frame powdercoated and just in the process of rebuilding it all. Do i have to put any exhaust paste on the bit wheres it joins in the middle as it looks like its had something on in the past. I will get a project thread up soon when i get the time so you can all see what ive been doing. Quote Link to comment Share on other sites More sharing options...
paul w Posted January 21, 2012 Report Share Posted January 21, 2012 it should have 2 o rings, its probably a good idea to replace these now. i also use a smear of silicon sealer between the surfaces, just stops a bit of "chatter" which can wear the aluminum. Quote Link to comment Share on other sites More sharing options...
haggi961 Posted January 22, 2012 Author Report Share Posted January 22, 2012 Yeah the two o rings are there so just these to replace. What type of silicone should i use as i only have tiger seal. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.