agricon Posted June 13, 2012 Report Share Posted June 13, 2012 Hi all, I am looking for a little help with my daughters 2007 16. 24v. I recently purchased a new throttle assemble for the bike from the UK as we don't have the dealer network here in New Zealand. The original throttle. The new assembly. The dealer sent me the newer version assembly with a different connector but also the corresponding connector half to replace the one on the bike. After fitting the new part I found that the bike runs fine but the LED display on the throttle is not illuminated. Has anyone come across this before? I am wondering if I missed something or have received a faulty throttle assembly possibly? The dealer stated that this throttle would be OK and the wires and wire colours do correspond. Thanks in advance Quote Link to comment Share on other sites More sharing options...
canada280i Posted June 14, 2012 Report Share Posted June 14, 2012 I had a similar situation with my 24v but ended up removing the original connectors from the original throttle wires and replacing the new ones so that it just plugged in directly, worked perfectly. Quote Link to comment Share on other sites More sharing options...
agricon Posted June 17, 2012 Author Report Share Posted June 17, 2012 Thanks for your reply, Unfortunately I've already cut them off and dumped them I Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.