digger 1 Posted January 23, 2013 Report Share Posted January 23, 2013 Bought this bike in bits. Have noticed on the inside of the clutch pressure plate there is a needle roller bearing but can't find any part that fits the push rod which goes against the needle roller bearing. Can anybody help?? Quote Link to comment Share on other sites More sharing options...
naichuff Posted January 23, 2013 Report Share Posted January 23, 2013 On the end of the gear box shaft the clutch push rod there should be a mushroom shaped piece ( similar in shape to a valve in a four stroke) with a machined face on the end This runs on the flat roller bearing The other side of the roller runs on the adjuser screw Inside the main gear shaft there should be a push rod (lever end) then a ball then the part as above After I assemble a clutch I would pull it in and gently turn it ajusting the springs untill it runs true then wire the nut on Quote Link to comment Share on other sites More sharing options...
digger 1 Posted January 23, 2013 Author Report Share Posted January 23, 2013 hi thanks for that the only thing is now where can i obtain one any ideas Quote Link to comment Share on other sites More sharing options...
bultaco49 Posted January 23, 2013 Report Share Posted January 23, 2013 I'm sure Dave at Bultaco UK will have one. This part is common to many Bultaco Sherpa engines. If not PM me and I will send you one. http://www.bultacouk.com/ Quote Link to comment Share on other sites More sharing options...
mowen123 Posted January 24, 2013 Report Share Posted January 24, 2013 the bultaco 175 is a 250cc bottom end with a 175cc top end they should be easy to find go on ebay mate i have a 175 they are a rare bike only 300 ever made so keep hold of it . Quote Link to comment Share on other sites More sharing options...
digger 1 Posted January 24, 2013 Author Report Share Posted January 24, 2013 hi bondy just got your email many thanks for that now i know the mushroom and ball bearing is missing. I will contact buultaco uk to see if they have them, will try to get some pics together when i start putting the bike back together Quote Link to comment Share on other sites More sharing options...
bondy Posted January 25, 2013 Report Share Posted January 25, 2013 hello digger yes that would be great to see. you shouldnt have any troubel in geting a mushroom and ball. ive just put a new air box on my 198B yesterday. Quote Link to comment Share on other sites More sharing options...
digger 1 Posted January 27, 2013 Author Report Share Posted January 27, 2013 bondy hi got back to the person i bought the bike off and heys found the mushroom so only need the ballbearing Quote Link to comment Share on other sites More sharing options...
bondy Posted January 28, 2013 Report Share Posted January 28, 2013 hello digger thats good news let us know how you get on. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.