scot taco Posted March 9, 2013 Author Report Share Posted March 9, 2013 Thanks Guy53 and feetupfun.I think I will do the same,then there is no need to worry about the swing arm bolt and will be much cheeper to do. Cheers, Scott Quote Link to comment Share on other sites More sharing options...
tog Posted March 14, 2013 Report Share Posted March 14, 2013 Just bought a set of TY175 footrest mounts from Sammy Miller and received them yesterday. I mentioned to them that I had read that they were a bit weak and they were most indignant saying that they had no reports of this! The backing plates are 5mm thick with the sections that hold the footrest 4mm thick. The bracket quality is OK but the footrests are obviously made to a budget with rust showing on the internals of the chromed footrests on receipt. To be fair to SM products, if they don't get reports of faults they can't improve them. Quote Link to comment Share on other sites More sharing options...
tony283 Posted March 14, 2013 Report Share Posted March 14, 2013 The TY175 SM pegs and brackets are not as big as the TY250 set and therefore do not bend as the footrest mount is farther forward. The TY250 set has the footrest mount further back and that tends to bend in towards the frame, however it can be bent back without too much hassle. Tony Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.