mccarro Posted March 30, 2013 Report Share Posted March 30, 2013 The fork on my 2008 has a thin insert in the hole the axle goes through on the disc side. The insert sits slightly proud of inside face of the fork. Is this right or should it be flush with the face of the fork? Is the insert meant to be pushed against the face of the bearing when the axle is tightened ? Mine appears to be seized in the fork. Any advice welcome Quote Link to comment Share on other sites More sharing options...
richt Posted March 31, 2013 Report Share Posted March 31, 2013 I've not seen any insert on mine. The inside face of the fork leg (disc side) is tight against the bearing when you tighten the spindle nut. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.