scorpa 4 dean Posted May 2, 2013 Report Share Posted May 2, 2013 Hi All, I have removed the petrol tank on my Scorpa SY250F to replace the radiator coolant and I am now having problems with the throttle cable and the revs sticking on when I turn the handlebars from left to right or sit down on the seat. I have tried various different positions with no joy. Does anyone have any ideas on the exact route of the cable if looking at the bike from sitting on the seat. The cable looks to be in new condition and also a bit short. I have matched the cable with a new one and it is exactly the same. Help required please. Quote Link to comment Share on other sites More sharing options...
digger144 Posted May 2, 2013 Report Share Posted May 2, 2013 i had same problem with my 250f it is where the cable goes into 2 . the main cable to carb slide & the other to the fuel pump.you have make sure it is properly seated at this connection. in fact i ended up leaving off the plastic cover where the cable runs. had no problems since Quote Link to comment Share on other sites More sharing options...
breagh Posted May 2, 2013 Report Share Posted May 2, 2013 Aye same here left the wee plastic infills out. When you put the tank back on you always have to move the cable junction box about. Quote Link to comment Share on other sites More sharing options...
scorpa 4 dean Posted May 3, 2013 Author Report Share Posted May 3, 2013 Thanks all very much appreciated. Quote Link to comment Share on other sites More sharing options...
scorpa 4 dean Posted May 3, 2013 Author Report Share Posted May 3, 2013 One last question: If looking from sitting on the seat which side is the cable routed left or right ? Quote Link to comment Share on other sites More sharing options...
breagh Posted May 3, 2013 Report Share Posted May 3, 2013 Left. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.