redline2097 Posted March 23, 2017 Report Share Posted March 23, 2017 We are currently fitting LMX big block motor to our oset frame. Peak watts with this brushless motor 7500w and max torque out of wheel about 125nm. Quote Link to comment Share on other sites More sharing options...
tommykh Posted August 18, 2017 Report Share Posted August 18, 2017 Super thread this! I am thinking of upgrading two Oset bikes with LiPo batteries, increased volts as well as good suggestions. Want input from you with experience on this, for the ultimate upgrade. I have the following bikes: Oset 16 spider 24v, 36A, 600W 20xx model Oset 20 36v, (48v engine 1200w) 2012 model. If I have to replace the existing controller, can I use KDS48100E, 100A, 24V-48V, on both bikes? Are there any other batteries I should go for than x number of 5800mAh 8S 25C Lipo? Please come with suggestions Quote Link to comment Share on other sites More sharing options...
redline2097 Posted September 28, 2017 Report Share Posted September 28, 2017 This is now very custom Oset 12.5 with 16.0 racing parts, LMX motor, lipos, domino throttle, Kelly controller. Self made plastics and seat. Looking good, half power on videos under. This is when we just received new motor and new kelly: Quote Link to comment Share on other sites More sharing options...
balga Posted July 2, 2018 Report Share Posted July 2, 2018 Hi, sorry to resurrect this old topic. just wanted to thank Redondo76 and all the others for the useful information. I just installed the Kelly on my son old Oset and what a difference! The diagrams and photos were super helpful and complete, thanks again 1 Quote Link to comment Share on other sites More sharing options...
redondo76 Posted July 23, 2018 Report Share Posted July 23, 2018 Did anyone change/upgrade their electric motor? Seems like my XYD-14A 750W motor (16" 26V 2012mod) has ended it's life... and I need to get a new one. OSET sells them but way too expensive. Anyone know how to source/where to buy? Any compatible models I can use? Thanks! Quote Link to comment Share on other sites More sharing options...
murata Posted July 28, 2019 Report Share Posted July 28, 2019 Yo tengo un problema no se como conectar el control a los cableados y tengo los planos pero no los entiendo Quote Link to comment Share on other sites More sharing options...
m_lindy Posted May 10 Report Share Posted May 10 HI all, trying to start the Kelly controller swap.Does this controller hook into the existing power/speed/response dials? I'm imagining this is omitted, but wasn't sure. Thanks Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.