March 23, 20179 yr We are currently fitting LMX big block motor to our oset frame. Peak watts with this brushless motor 7500w and max torque out of wheel about 125nm.
August 18, 20179 yr Super thread this! I am thinking of upgrading two Oset bikes with LiPo batteries, increased volts as well as good suggestions. Want input from you with experience on this, for the ultimate upgrade. I have the following bikes: Oset 16 spider 24v, 36A, 600W 20xx model Oset 20 36v, (48v engine 1200w) 2012 model. If I have to replace the existing controller, can I use KDS48100E, 100A, 24V-48V, on both bikes? Are there any other batteries I should go for than x number of 5800mAh 8S 25C Lipo? Please come with suggestions
September 28, 20178 yr This is now very custom Oset 12.5 with 16.0 racing parts, LMX motor, lipos, domino throttle, Kelly controller. Self made plastics and seat. Looking good, half power on videos under. This is when we just received new motor and new kelly:
July 2, 20188 yr Hi, sorry to resurrect this old topic. just wanted to thank Redondo76 and all the others for the useful information. I just installed the Kelly on my son old Oset and what a difference! The diagrams and photos were super helpful and complete, thanks again
July 23, 20188 yr Did anyone change/upgrade their electric motor? Seems like my XYD-14A 750W motor (16" 26V 2012mod) has ended it's life... and I need to get a new one. OSET sells them but way too expensive. Anyone know how to source/where to buy? Any compatible models I can use? Thanks!
July 28, 20197 yr Yo tengo un problema no se como conectar el control a los cableados y tengo los planos pero no los entiendo
May 10, 20242 yr HI all, trying to start the Kelly controller swap.Does this controller hook into the existing power/speed/response dials? I'm imagining this is omitted, but wasn't sure. Thanks
June 14, 20242 yr On 5/11/2024 at 12:10 AM, m_lindy said: HI all, trying to start the Kelly controller swap.Does this controller hook into the existing power/speed/response dials? I'm imagining this is omitted, but wasn't sure. Thanks Hi, the dials are not used but you can adjust the power, speed and response using a computer connected to the Kelly controller.
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.