hello all can any body tell me what colour white the 199B is? am just tiding my 199B up shes not to bad it's just the back end needs abit off TLC i don't want to strip the full bike iv'e already strip most off it forks are having a service and paint. i was tempted to take the engine out but i can live with it ill upload some photos off my progress. cheers guys.

hello all am thinking of having one of my 199A powder coated in wite any idea witch ral code it is

Your own post on April 5 2012.

The answer

The white color is RAL 9016, Verkehrsweiss, (traffic white).

The blue color is btw. RAL 5015, Himmelblau, (sky blue).

Took me 45 seconds to find the answer!!!

oh thank you for that i can't remember saying that cheers.

anybody had there wheels anodised? and what colour? i was thinking satin matt black on the 199b or may be blue and leave the outer edge alloy

199b in progress.

progress whent down the local paint shop witch just round the corner and he mixed me some white in a rattle can. so will try it tomorrow i did primer it today hear.

wheels have been sent off to be rebuilt new IRC tyres to be put on. a box off goodies came this moring from inmotion cheers for fast delivery. the falcon shocks seem to be good so iv'e strip them and will paint the body black clean and put back together. lower fork legs are finished in blue ready to be put together with new persang springs. new brake shoes and new Air box sprockets and chain. lutch case also been repainted with alloy clutch ajust cap and filler. club foot to be washed out with petrol and put back. down pipe looks like it's been repack at some point. also new slide needel and clip and needel jet. for bing carb. i have new mikuni also will see witch is better. will upload photos when shes finshed cheers bondy.

199b top coat and rear shocks striped and cleaned and damper body painted with new blue inmotion fixing kit very smart indeed.

my box off goodies came from inmotion

update on the 199b new rims on the way to the wheel builders mean time club foot as been cleaned and resprayed. fork seviced and awaiting oil. clutch cover sprayed and new alloy ajuster cap and new R/H gear leaver not sure yet on with side to go for i have both sides gear leavers and brake pedels. new Air box to be mounted. hears some photos cheers bondy.

Looking good bondy my box arrived today also from in motion.

Cheers

John.

cheers john nice getting those boxes not good for the wallet tho. i sprayed the club foot today so 1 less job to do. i would off liked moden foot pegs on witch i have with hangers. but i don't want to strip the bike may be next time. and trying to find some 1 that can weld the hangers on the corrct way the last ones i had done was welded on the wrong way round on the spare 198A frame. i have cut the sides and top off the old Air box to get the mounting holes correct and for the side panels.

all all black renthel bars came today. front brake and clutch leavers painted.

The Stealth look i see.

yes the leavers are Amal was going to buy new ones but can't seem to buy them iv'e looked all over. can still get the silver ones but not the black not Amal can get cheap copy's.