Jump to content

Sign in to follow this  
hondatl125

Carb Help Please

Recommended Posts

Hi Tel,

I've bought a tl125s 1976 (miller highboy(mk1).

My carb is pretty knackered and was wondering if those carbs on ebay from china are any good and if they're correct venturi and jet sizes?

They're are about £30 plus import charges -(no idea how much this would cost in total I live in England, There is another carb advertised on ebay from a dealer but it states a 1988 tl125 with a 18mm venturi my one seems to measure 21.5mm with the verniers.

Any help would be much appreciated.

Thanks in advance

Share this post


Link to post
Share on other sites
 

If it is of any help to you it is difficult to measure venture size accurately using verniers, as they

cant reach deep enough in the throat.

Unless your carb is missing parts you can have a go with cleaning & setting the float to spec, carbs don't

usually go to far away.

Don't know about Chinese carbs, might be hard to source parts if ever needed.

Good luck Larry

Share this post


Link to post
Share on other sites
 

I have a repro carb on my TLR250. It's of decent quality but I put OEM parts in it, particularly the needle which appears to be aluminum in the repro. The jets and inlet valve are interchangeable.

You should be able to install the repro and have a much better running bike.

Share this post


Link to post
Share on other sites
 
 

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.

Loading...
Sign in to follow this  

×
×
  • Create New...