endokid Posted March 14, 2016 Report Share Posted March 14, 2016 Stripped the clutch on the Evo its got up and down play on the main shaft is the bearing knackered or is this normal. Quote Link to comment Share on other sites More sharing options...
goudrons Posted March 15, 2016 Report Share Posted March 15, 2016 (edited) Is it the shaft and clutch inner moving or just the outer basket moving on the shaft? There's often a bit of float between the basket and shaft and it's normal as the outer basket spins freely on the shaft. The clutch inner (and shaft it's self) is usually tight or may have a tiny amount of play, but will feel a lot more solid than the outer basket. Edited March 15, 2016 by goudrons Quote Link to comment Share on other sites More sharing options...
endokid Posted March 16, 2016 Author Report Share Posted March 16, 2016 Is it the shaft and clutch inner moving or just the outer basket moving on the shaft? There's often a bit of float between the basket and shaft and it's normal as the outer basket spins freely on the shaft. The clutch inner (and shaft it's self) is usually tight or may have a tiny amount of play, but will feel a lot more solid than the outer basket. The play is on the shaft itself, I think it will need a new bearing, engine strip I guess to change the bearing. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.