betamike Posted February 25, 2006 Share Posted February 25, 2006 Hi all, my friend bought an 04 sherco 250 today and he was wondering how you fit a kill switch.Is it an easy job or do you have to cut wires? Also how much gear oil do we put in? is it 450cc like the 290? thank you in advance! Quote Link to comment Share on other sites More sharing options...
andy_290 Posted February 25, 2006 Share Posted February 25, 2006 I'm interested also, need to sort a kill switch out for mine too. Pretty sure the 250 is 450cc too. Quote Link to comment Share on other sites More sharing options...
shercoholic Posted February 26, 2006 Share Posted February 26, 2006 While this contains instructions for replacing the standard wiring harness with the RYP abbreviated item, it also show the connections you are after. http://www.sherco.com/downloads/wayne/Wiri...nstallation.pdf JM of Marlintec also has a colourful simplified diagram if you have your dictionary handy. Marlintec_wiring_diag.pdf Quote Link to comment Share on other sites More sharing options...
nigel dabster Posted February 26, 2006 Share Posted February 26, 2006 Pretty sure its a matter of grounding the black wire from the coil. Quote Link to comment Share on other sites More sharing options...
jackman Posted February 26, 2006 Share Posted February 26, 2006 I used a two wire yz kill switch on my ty175. And it works great! I found this thread to be all the help I needed! Nigel is right, you just ground the black wire of the killswitch on the coil. (I connected the extra black wire to where the old killswitch was connected aswell and it stops WAY better than the old single wire killswitch. Plus it doesn't shock me now when I'm trying to shut'er'down!) Hope that's of use Quote Link to comment Share on other sites More sharing options...
sherco 125 Posted February 28, 2006 Share Posted February 28, 2006 behind the front light there is a plug with a few wires on un plug it and the change kill switch its something like that i dont know the real name for the switch Quote Link to comment Share on other sites More sharing options...
betamike Posted February 28, 2006 Author Share Posted February 28, 2006 thanks for your help chaps, the kill switch has now been fitted. cheers Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.