Rdway60 Posted December 17, 2022 Report Share Posted December 17, 2022 (edited) Hi Folks, this is probably rudimentary for some of you, but I just want to get it right. Bought a new PBI dished rear sprocket (428x55T) and replacing what was on the bike (flat with no spacer, 428x52T) as it came to me. So when installed, teeth are dished away or outward from (to the left) the wheel correct? Chain alignment looks straight to me this way. Searched the original manual and could not get a good visual or printed verification from it. BTW replacing 14/52 with a 13/55 and new chain setup. Will be used mainly for vintage trials and general plonking. Thanks in advance. Edited December 17, 2022 by Rdway60 Quote Link to comment Share on other sites More sharing options...
feetupfun Posted December 18, 2022 Report Share Posted December 18, 2022 11 hours ago, Rdway60 said: Hi Folks, this is probably rudimentary for some of you, but I just want to get it right. Bought a new PBI dished rear sprocket (428x55T) and replacing what was on the bike (flat with no spacer, 428x52T) as it came to me. So when installed, teeth are dished away or outward from (to the left) the wheel correct? Chain alignment looks straight to me this way. Searched the original manual and could not get a good visual or printed verification from it. BTW replacing 14/52 with a 13/55 and new chain setup. Will be used mainly for vintage trials and general plonking. Thanks in advance. Yes you have the dish the correct way. Yes 13/55 is a good choice for competition riding. 1 Quote Link to comment Share on other sites More sharing options...
Rdway60 Posted December 18, 2022 Author Report Share Posted December 18, 2022 Thanks for the validation Ftup. Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.