trisscross Posted March 18, 2006 Report Share Posted March 18, 2006 i cant find any silicone grease i know i have some but lost it what can i use insted ? i am replacing the master cylinder and slave seals i normaly use cleen spray grease when i work on cars will this be ok? thanks tris Quote Link to comment Share on other sites More sharing options...
charliechitlins Posted March 19, 2006 Report Share Posted March 19, 2006 I would only use brake fluit, as it's the only thind specifically designed to come in contact with those rubber parts. Quote Link to comment Share on other sites More sharing options...
nigel dabster Posted March 19, 2006 Report Share Posted March 19, 2006 be very careful as there is 2 types on gassers one is not good with the other, guess that goes for the rubbers too. Quote Link to comment Share on other sites More sharing options...
jtt Posted March 19, 2006 Report Share Posted March 19, 2006 i normaly use cleen spray grease when i work on cars will this be ok?thanks tris <{POST_SNAPBACK}> I wouldn't chance it...those slave o-rings can be sensitive. You should be able to find silicone grease in any autoparts outlet. Heck I'd send you a blob, but don't think it would survive the mail Quote Link to comment Share on other sites More sharing options...
trisscross Posted March 20, 2006 Author Report Share Posted March 20, 2006 ok thanks i found some but please tell me it was ok to use dot 4 fluid Quote Link to comment Share on other sites More sharing options...
jtt Posted March 27, 2006 Report Share Posted March 27, 2006 ok thanks i found some but please tell me it was ok to use dot 4 fluid <{POST_SNAPBACK}> So long as the bike is pre-06 and not a Raga Quote Link to comment Share on other sites More sharing options...
Recommended Posts
Join the conversation
You can post now and register later. If you have an account, sign in now to post with your account.