Struggle with Technical Data for Sherco X Ride 290 2017-2018

[Cherokaa87]

Hello everyone. My first post on a forum. I'm pleased to find you here.
I have recently purchased a Sherco 290 x-ride. The bike was 2017 m.y, stored, never used, no mileage on clock. So I got it assembled and completed. We didn't touch oils and fluids at first, just doublecheck, it was there. So, somehow we ended up with a cold seizure. It happened instantly.

So, I bought a used cylinder and barrel from the UK, with decent condition, and now I'm on a second run to try to get it run.

But, I'm already scared enough and don't want to do anything stupid again. I also found out there was no fluid in the hydraulic clutch. I have no specifications for: 

1. Jetting settings for keihin 28 mm carb,

2. Data for fluids for hydraulic clutch and ext,

3. Oil specs for gearbox,

4. Engine tolerances to double check measurements (cylinder gap, ring gap, squish). Also a new cylinder came w/o cutouts on the barrel for small O rings and I'm going to use brass O rings on top of the head to prevent coolant leak,

5. Don't know coolant specifications either,

6. Going to try 50:1 mixture fuel to oil.

Edited 11 hours ago by Cherokaa87

[konrad]

You can't find the manual here?   https://www.sherco.com/en/download-documentation/manuals