Im about to start looking at my Fantic 240 clutch as its a little grabby, will the cover come off in situ? it looks tight and i cant quite tell if the motor needs to be lifted a little so the bottom front bolt and cover will clear the frame.
0
1 reply to this topic
#1
-
- Members
-
- 524 posts
Advanced Member
- Location:Richmond North Yorkshire
- Bike:Scorpa
- Club:Richmond Darlington Guisborough Ripon
Posted 14 December 2010 - 06:49 PM
“There he goes. One of God's own prototypes. Some kind of high powered mutant never even considered for mass production. Too weird to live, and too rare to die.”
"Fu*k it john lets have a Beer."
"Fu*k it john lets have a Beer."
#2
-
- Members
-
- 1,104 posts
Advanced Member
- Location:Germany
- Bike:Fantics
Posted 14 December 2010 - 10:02 PM
yes it should do as the original 240 had a small clutch drum and cover...
if it is a 241 or even a 301 or later, the engine mounts will need loosening...ther clutch basket and hence cover were bigger diamente
lee
if it is a 241 or even a 301 or later, the engine mounts will need loosening...ther clutch basket and hence cover were bigger diamente
lee
Edited by Lee Harris, 14 December 2010 - 10:02 PM.
I swear to drunk I'm not God!"
1 user(s) are reading this topic
0 members, 1 guests, 0 anonymous users
